Sentinel Deposit Remover 5 Litre
Sentinel

Sentinel Deposit Remover 5 Litre

Sentinel

Product Code: 7119844

£65.55
Ex Tax: £54.62
Quantity:  
 

Sentinel Deposit Remover 5 Litre

Sentinel Deposit Remover is a powerful highly active cleaning agent for use in central heating systems. It is specifically designed to remove objectionable iron oxide deposits from heat exchangers, radiators and pipework. Its unique composition allows Sentinel Deposit Remover to act as a complexing and penetrating dispersant under less acidic conditions than other acid based products.

Sentinel Deposit Remover is suitable for use with all commonly encountered metals and alloys. Aluminium may be cleaned, but special precautions must be taken with a maximum cleaning time of 2 hours.

Potable water systems may be cleaned, but must be flushed thoroughly before being returned to service.

Dosage.

The standard dose for Sentinel Deposit Remover is 5% of system volume, i.e., 5 litre per 100 litres of system water. For faster cleaning, or with heavily fouled equipment, add 10 litres of Sentinel Deposit Remover per 100 litres of water. The main system pump is suitable for circulation throughout the entire system.

Cleaning action is accelerated when the Sentinel Deposit Remover solution is heated and in constant circulation, but the temperature must not exceed 60°C.

More rapid cleaning may be carried out if Sentinel Deposit Remover is used in conjunction with a power flushing device.

After cleaning, the system should be drained and flushed until the water runs clear. On refilling, the system should be treated with Sentinel X100 Inhibitor, or Sentinel X500 Inhibited Antifreeze.