Titanium 11" Immersion & RDT Thermostat
Heatrae

Titanium 11" Immersion & RDT Thermostat

Heatrae

Product Code: 95110400R

£183.34
Ex Tax: £152.79
Quantity:  
 

Titanium 11" Immersion & RDT Thermostat

Titanium 11" Copper Immersion & RDT Thermostat 240 Volt 3 kw

  • Titanium-sheathed for hard and very aggressive water conditions.
  • Normally Side of Cylinder Entry for this size immersion.
  • A range of 3kW immersion heaters
    suitable as the sole heat source or for use
    in association with an indirect heating coil.
  • Fitted with RDT combined thermostat
    and re-settable safety cut-out.

 

Titanium Immersion Heaters

Long Life Titanium Immersion Heaters. Our Titanium
Immersion Heater sets a new standard for operational life ? even
in the hardest or most aggressive water conditions.
Hard and aggressive water. Problems with water quality
continue to grow. Hard and aggressive water can substantially
reduce the life and effectiveness of a standard immersion heater.
As scale builds up, it takes longer to transfer heat to the water
and can cause early element failure.
Aggressive water can attack and corrode conventional
immersion heaters resulting in premature failure.
FIT THE BEST ? FIT TITANIUM. Titanium?s strength, weight and
smooth finish enables it to withstand extreme stress, fluctuating
temperatures and corrosive environments.
Heatrae Sadia?s Titanium Immersion Heaters are the most
reliable and cost-effective solution for hard and aggressive
water applications.
To underline the effectiveness of Titanium, Heatrae Sadia offers
an impressive five-year guarantee giving users absolute peace
of mind.

Normally dispatched within 1 – 2 working days

Question

I am looking for an Immersion Heater & Thermostat, this will be installed in an area where the water is very very hard is it suitable or do you have a suitable product.  The element should be about 2-3 Kw.

Answer

Please find product page link for the Titanium 11" Heating element http://www.uk-plumbing.com/titanium-11-immersion-and-rdt-thermostat-p-42255.html which are used in hard water areas and are suitable for conventional vented cylinders only with a side entry.

Question

Hi – I wish to purchase 2 off Heatrae Sadia Titanium Immersion heater element ( 11 inch ) type 95:110:400R. I live in Jersey, Channel Islands. Please may I have a quotation for supplying 2 of the above elements less VAT + carriage.

Answer

Thank you for your enquiry - Please find product page link for the Heatrae Sadia Titanium Immersion heaters 95:110:400R http://www.uk-plumbing.com/titanium-11-immersion-and-rdt-thermostat-p-42255.html also for the additional shipping cost for sending this to the Channel Islands which you will need to add to your basket at time of ordering. UK Vat of 20% is removed when booking out to The Channel  Islands.