Heatrae Sadia Hotflo 10L 2.2KW Water Heater
Heatrae

Heatrae Sadia Hotflo 10L 2.2KW Water Heater

Heatrae

Product Code: 95050148 PC

£251.33
Ex Tax: £209.44
Quantity:  
 

Heatrae Sadia Hotflo 10L 2.2KW Water Heater

  • Choice of 10 or 15 litre units.
  • Replaceable copper inner container with 2.2kW integral heating element.
  • No anode to inspect or replace.
  • Externally adjustable thermostat 10-70°C.
  • Supplied with pressure relief valve.
  • CFC-free insulation.
  • Element 'ON' indicator.
  • Suitable for use with any standard tap or mixer.
  • Fitted with 1 metre of 3 core flex.
  • Comprehensive installation instructions.
  • BEAB and WBS approved.
  • more info
 

Hotflo FOR UP TO THREE BASINS

The Hotflo range sets a new standard in value for money, small
unvented water heating. It features an inner container with
integral element for increased reliability and quick, easy
replacement. Hotflo is suitable for a wide variety of point-of-use
applications and a full range of accessories is available to ensure
Hotflo can be installed in any situation.
High-grade copper is used for the Hotflo inner container
because of its optimum performance in terms of durability and
corrosion resistance. Copper requires no sacrificial anode and
therefore avoids the need for regular inspection and replacement.
Unlike other lesser grade materials it also withstands shock and
vibration during delivery, installation and maintenance.
10 and 15 litre capacities
2.2kW element rating
Replaceable copper inner container with integral
heating element
Two-year guarantee
Externally-adjustable thermostat 10°C to 70°C
CFC/HCFC free (ODP zero) flame-retardant expanded
polystyrene.
Element 'On' indicator
No anode to inspect or replace
Suitable for use with any standard tap or mixer
Fitted with 1 metre of 3-core cable
Comprehensive installation instructions
BEAB and kiwa approved to UK water supply regulations
Heat exchanger replacement
Hotflo's innovative design makes replacement of the inner
container with integral element, quick and easy.
The screwless construction of this range allows swift removal of the
terminal cover, plug-in thermostat, neon assembly and mains cable.
This permits the plastic top moulding to be detached from the steel
outer case along with the pre-formed polystyrene insulation. The
inner container can now be lifted clear and replaced.

ACCESSORIES

A full range of accessories is available for installation with Hotflo 10
and 15 litre water heaters. These are supplied as 'Accessory Packs'.
Thermostatic blending valve, Pack U3 (TMV2) and Pack U7
(TMV3), can also be used with Multipoint 30 and 50 litre units.
When installing small unvented water heaters, it is essential that
the correct accessory packs are used.