Honeywell Full Programmer 7 Day Two Channel ST9400C1000
Honeywell

Honeywell Full Programmer 7 Day Two Channel ST9400C1000

Honeywell

Product Code: ST9400C1000

£80.55
Ex Tax: £67.13
Quantity:  
 

Honeywell Full Programmer 7 Day Two Channel ST9400C1000

Honeywell Full Programmer ST9400C1000 7 Day Two Channel

  • LoT display, providing text feedback that gives help and programming hints
  • Large backlit display
  • Programmer indicator lights
  • Can be set as 7, 5/2 or 1 day operation
  • Holiday button for programme override
  • Up to 3 on / off periods per day
  • Automatic summer / winter 1 hour time change
  • Fits on industry standard back plate

Direct Replacement Programmer for older Honeywell models: ST772, ST6300A, ST6200A, ST6400A and ST6400C.

The ST9400C is a 7 day two channel programmer designed for individual control of both hot water and heating and feature the LoT� display that gives clear plain English instructions whenever any button or slider is used,allowing installers, homeowners and users to operate the programmer without needing to find an instruction manual. It also offers up to three "on" periods per day. Additionally each day may be programmed differently. This programmer may also be configured as a Mini Programmer for older gravity - circulation stored hot water systems.

Normally same day dispatch

Question

Hi, Have you in stock any old Honeywell programmers model number ST6400C1003. We have a need of three of them and Honeywells new one is not compatible with our wiring.

Answer

Thank you for your enquiry - Unfortunately the ST6400C1003 is obsolete and no longer available although the Honeywell Programmer ST9400C1000 is shown as having the same wiring and backplate.
https://www.uk-plumbing.com/honeywell-full-programmer-7-day-two-channel-st9400c1000-p-48586.html

Question

Hi – I need a Danfoss-Randall HPA2 22mm valve actuator and Honeywell 703010000B controller (with time settings etc for heating and hot-water) Grateful if you would advise availability and cost.

Answer

Thank you for your enquiry - Please find product page link for the Danfoss HPA2 Actuator Only
https://www.uk-plumbing.com/danfoss-randall-hpa2-2-port-valve-actuator-only-p-1393.html
which is a stock item.
The Honeywell 703010000B controller  is long obsolete but the full programmer below will be a suitable replacement and again a stock item.
https://www.uk-plumbing.com/honeywell-full-programmer-7-day-two-channel-st9400c1000-p-48586.html

Question

Hi – I need Honeywell st6400c programmer, can you advise of a suitable replacement please.

Answer

Thank you for your enquiry - Please find product page link for Honeywell Programmer ST9400C1000
https://www.uk-plumbing.com/honeywell-full-programmer-7-day-two-channel-st9400c1000-p-48586.html
which can be used to replace the Honeywell ST6400C, using existing backplate and wiring.