Drayton PTS1 Pipe Thermostat
Invensys

Drayton PTS1 Pipe Thermostat

Invensys

Product Code: 03 01 260

£35.22
Ex Tax: £29.35
Quantity:  
 

Drayton PTS1 Pipe Thermostat

Drayton PTS1 Pipe/Frost Thermostat

  • Changeover contacts.
  • Lockable setting knob.
  • High and low limit application.
  • Conduit adaptor/gland seal.
  • Concealed cover fixing screw.
  • Drayton PTS1 Data Sheet.

The Drayton PTS1 Pipe Thermostat can be used in domestic or commercial installations for applications such as high or low limit. It is typically used, in conjunction with the Drayton RTS3 Air Frost Thermostat, to provide two stage frost protection for boilers and exposed pipework.

Optimum start is a money saving feature which automatically reduces the warm up time for your heating system. As the weather becomes milder, optimum start can delay the heating start times so that fuel is not wasted when rooms are brought up to temperature earlier than necessary.

Normally same day dispatch

Question

Do you supply Drayton PTS1 PIPE THERMOSTAT?
THE APPLICATION IS TO PICK UP TEMPERATURE ON SOLAR PANEL OUTLET PIPE AND
SWITCH ON CIRCULATING PUMP AND AS PIPE TEMPERATURE DROPS CIRCULATING PUMP
WOULD SWITCH OFF.
CAN YOU CONFIRM THE DRAYTON UNIT CAN BE WIRED TO SWITCH ON AS TEMPERATURE
RISES AND CAN BE SET BETWEEN 20 AND 90 DEGREES
THANKS FOR YOUR HELP

Answer

Thank you for your enquiry - Please find product page link for the PTS1 Pipe thermostat
which can be used as a simple temperature switch for powering the pump
https://www.uk-plumbing.com/drayton-pts1-pipe-thermostat-p-54078.html