Stelrad Low Surface Temperature Radiator LST2 Plus 600 X 2050 P+ Complete with Casing & Grille 7081 btu's/hr
Stelrad

Stelrad Low Surface Temperature Radiator LST2 Plus 600 X 2050 P+ Complete with Casing & Grille 7081 btu's/hr

Stelrad

Product Code: 142240

£680.36
Ex Tax: £566.97
Quantity:  
 

Stelrad Low Surface Temperature Radiator LST2 Plus 600 X 2050 P+ Complete with Casing & Grille 7081 btu's/hr

  • 10 year warranty.
  • LST Plus: The pack includes heat emitter, radiator panel, casing panels, valve and pipework, kick grille/pipe
    cover grille and all required hardware fixings.
  • An arthritic adaptor is supplied as standard for special need environments.
  • Safety grilles are supplied as standard and can be assembled to run full width, or simply to cover pipes on one side only.
  • Each Stelrad LST2 has an attractive, flat panel outer casing which is totally reversible to allow piping flexibility.
  • Stelrad LST Radiator Brochure

    Complete One Box Package For Ease Of Specification and Installation.
    The Perfect Solution For Safety Critical Environments

  • The UK's leading radiator manufacturer has
    created a low surface temperature radiator that
    comes in a complete, one box pre-assembled
    package, resulting in simple product selection and
    installation, significantly reducing cost.
    All Stelrad LST2 radiators have an integral
    remote sensing thermostat valve, the highly
    specified Danfoss RA 2000, which can be pre-set
    to allow adjustment of room air temperature.
    An arthritic adaptor is supplied as standard for
    special need environments.
    A lockshield valve is also supplied as standard
    and can only be adjusted with a 6mm Allen key,
    hidden with a neat metal dust cover to discourage
    unauthorised tampering. Safety grilles are supplied
    as standard and can be assembled to run full
    width, or simply to cover pipes on one side only.

    OUTSTANDING PERFORMANCE
    WITHOUT COMPROMISE

    Each Stelrad LST2 has an attractive, flat
    panel outer casing which is totally reversible to
    allow piping flexibility. Simple and quick to install,
    the casing is held by security fittings to prevent
    unauthorized access to the emitter accommodated
    inside with a unique seam fixing bracket system.
    The emitter itself provides high outputs
    through convection, for outstanding heating
    performance. Strictly controlled independent
    laboratory testing ensures that each emitter is
    guaranteed to perform to a maximum working
    pressure of 116 psi (8 bar) and conform to
    BS EN 442 - the European Standard for radiators.
    The creation of an elegant design with ease of
    installation has not meant compromise in regard
    to safety. Fully compliant with all safety standards,
    the Stelrad low surface temperature units meet
    the strict requirements of the NHS Guidance Note
    for "Safe Hot Water and Surface Temperature".
    The LST2 can be installed in commercial and public
    buildings running heating systems in excess of
    90°C with total public safety
    assured, as the maximum
    casing temperature will not
    exceed 43°C.

    A COMPLETE PACKAGE WITH
    TOTAL QUALITY

    The Stelrad LST2 is manufactured from the most
    sophisticated production resources in Europe, under
    ISO 9000 in the UK.
    As a measure of the all round dependable quality
    and performance, the Stelrad LST2 comes complete
    with a 5-year Manufacturer's Warranty.

    REMOTE SENSING
    THERMOSTATIC VALVE

    The Danfoss RA2000 is designed specifically for
    commercial heating systems and can be pre-set to
    allow adjustment of room temperature between
    5°C and 26°C. Special tools are not required, as the
    valve is gland seal removable.

    TWO COAT PAINT PROCESS

    Each Stelrad LST2 radiator is subjected to a
    multi stage cleaning process before the paint is
    applied. This involves several rinsing stages,
    including an iron phosphate and demineralization
    rinse.
    The first coat of paint is applied by
    electrophoresis and the radiator is then stoved and
    cooled. The second powder coat, in warm white
    (RAL 9010) is applied and the radiator goes
    through a final curing stage. It is then allowed to
    cool prior to packaging.