Stelrad Low Surface Temperature Radiator LST2 Plus 500 X 850 P+ Complete with Casing & Grille 1984 btu's/hr
Stelrad

Stelrad Low Surface Temperature Radiator LST2 Plus 500 X 850 P+ Complete with Casing & Grille 1984 btu's/hr

Stelrad

Product Code: 142226

£273.67
Ex Tax: £228.06
Quantity:  
 

Stelrad Low Surface Temperature Radiator LST2 Plus 500 X 850 P+ Complete with Casing & Grille 1984 btu's/hr

  • 10 year warranty.
  • LST Plus: The pack includes heat emitter, radiator panel, casing panels, valve and pipework, kick grille/pipe cover grille and all required hardware fixings.
  • An arthritic adaptor is supplied as standard for special need environments.
  • Safety grilles are supplied as standard and can be assembled to run full width, or simply to cover pipes on one side only.
  • Each Stelrad LST2 has an attractive, flat panel outer casing which is totally reversible to allow piping flexibility.
  • Stelrad LST Radiator Brochure
 

Complete One Box Package For Ease Of Specification and Installation.
The Perfect Solution For Safety Critical Environments

The UK's leading radiator manufacturer has
created a low surface temperature radiator that
comes in a complete, one box pre-assembled
package, resulting in simple product selection and
installation, significantly reducing cost.
All Stelrad LST2 radiators have an integral
remote sensing thermostat valve, the highly
specified Danfoss RA 2000, which can be pre-set
to allow adjustment of room air temperature.
An arthritic adaptor is supplied as standard for
special need environments.
A lockshield valve is also supplied as standard
and can only be adjusted with a 6mm Allen key,
hidden with a neat metal dust cover to discourage
unauthorised tampering. Safety grilles are supplied
as standard and can be assembled to run full
width, or simply to cover pipes on one side only.

OUTSTANDING PERFORMANCE
WITHOUT COMPROMISE

Each Stelrad LST2 has an attractive, flat
panel outer casing which is totally reversible to
allow piping flexibility. Simple and quick to install,
the casing is held by security fittings to prevent
unauthorized access to the emitter accommodated
inside with a unique seam fixing bracket system.
The emitter itself provides high outputs
through convection, for outstanding heating
performance. Strictly controlled independent
laboratory testing ensures that each emitter is
guaranteed to perform to a maximum working
pressure of 116 psi (8 bar) and conform to
BS EN 442 - the European Standard for radiators.
The creation of an elegant design with ease of
installation has not meant compromise in regard
to safety. Fully compliant with all safety standards,
the Stelrad low surface temperature units meet
the strict requirements of the NHS Guidance Note
for "Safe Hot Water and Surface Temperature".
The LST2 can be installed in commercial and public
buildings running heating systems in excess of
90°C with total public safety
assured, as the maximum
casing temperature will not
exceed 43°C.

A COMPLETE PACKAGE WITH
TOTAL QUALITY

The Stelrad LST2 is manufactured from the most
sophisticated production resources in Europe, under
ISO 9000 in the UK.
As a measure of the all round dependable quality
and performance, the Stelrad LST2 comes complete
with a 5-year Manufacturer's Warranty.

REMOTE SENSING
THERMOSTATIC VALVE

The Danfoss RA2000 is designed specifically for
commercial heating systems and can be pre-set to
allow adjustment of room temperature between
5°C and 26°C. Special tools are not required, as the
valve is gland seal removable.

TWO COAT PAINT PROCESS

Each Stelrad LST2 radiator is subjected to a
multi stage cleaning process before the paint is
applied. This involves several rinsing stages,
including an iron phosphate and demineralization
rinse.
The first coat of paint is applied by
electrophoresis and the radiator is then stoved and
cooled. The second powder coat, in warm white
(RAL 9010) is applied and the radiator goes
through a final curing stage. It is then allowed to
cool prior to packaging.