Sentinel X200 De-Scaler 20 Litre
Sentinel

Sentinel X200 De-Scaler 20 Litre

Sentinel

Product Code: 7127702

£276.73
Ex Tax: £230.61
Quantity:  
 

Sentinel X200 De-Scaler 20 Litre

  • Restores boiler efficiency.
  • Eliminates "kettling".
  • Safe and non-corrosive.
  • A much faster, simpler method of de-scaling.
  • No need to flush - stays in system.
  • Sentinel X200 Data Sheet.

Sentinel X200 is a non-acid product which has been formulated for the treatment of kettling in central heating boilers caused by lime scale. Unlike alternative treatments, Sentinel X200 is added to the system and left there without causing any problems. Sentinel X200 is extremely successful in reducing noise problems caused by the presence of lime scale on the heat exchanger surface, and restoring boiler efficiency.

Many noise problems are caused by system design or mechanical faults. It is important to check for these before seeking a chemical solution.

Boiler noise can also be caused by sludge (e.g., iron oxide corrosion debris), in which case, the system should be cleansed with Sentinel X400.

1 litre of Sentinel X200 is sufficient to treat a typical domestic system of 8 to 10 radiator panels. Larger systems should be dosed with 2 litres. The time taken for boiler noise to reduce/be eliminated will depend on the hardness and quantity of lime scale present. In extremely severe cases, a further dose of Sentinel X200 may be necessary.

Sentinel X200 should be left in the system. The water should also be treated with Sentinel X100 inhibitor, or Sentinel X500 inhibited antifreeze.