Rifeng Underfloor Heating Pack - 200 Square Metre
Product Code: 200sqm Room Pack
Ex Tax: £1,200.00
Rifeng Underfloor Heating Pack - 200 Square MetreRifeng Underfloor Heating Pack - 200 Square Metre
Delivery normally within 2 working days. The Rifeng 200 square metre warm water Underfloor Heating Pack comes complete with all the materials listed above and will contain all requirements for a basic underfloor heating system for 10 separate heating zones. A list of related products that will enhance the control and installation of the underfloor heating system including thermostat, actuators, wiring centres and tools can be found lower down this page under related products. Coverage at 200mm pipe spacing suitable for an area of 200 Square Metres and is the more common pipe spacing used for the Primary heat source in living areas with normal height ceilings such as Lounges, Bedrooms, Bathrooms and Kitchens etc. with normal heat loss. Coverage at 150mm pipe spacing suitable for an area of 150 Square Metres and is the more common pipe spacing used for the Primary heat source in living areas such as Conservatories with higher than normal heat loss. Coverage at 300mm pipe spacing suitable for an area of 300 Square Metres and is the more common pipe spacing used for the Secondary heat source running alongside a Primary heat source such as a conventional radiator Heating system.
- 1000 Metres of Rifeng Multilayer Pipe
- 10 Port Manifold
- 20 x 16mm Compression Connector Cores
- Temperature Controller and Pump
- Pipe Clips x 1000
- 75 Metres of Edge Insulation Roll
- Pipe Reaming Tool
Temperature Controller and Pump A
compact, modular control pack for underfloor heating systems up to
14kW. Designed to be lightweight and compact in order to connect
directly onto a standard manifold without the need for extra brackets or support. The control pack consists of a mixing valve, circulating pump, return elbow, manifold adaptor and all necessary seals.