T4360

The T4360 is a mains voltage frost thermostat designed to give
automatic frost protection to boilers and pipework, situated in
risk areas, as well as to the fabric of the building.

Installation
The Frost Thermostat must be
located in the coldest part of the
house, but where it can respond to a
rise in temperature as a result of
switching on the boiler. If situated in
an outhouse or garage, it is strongly
recommended that a pipe thermostat
should also be used to switch off the
boiler when the return temperature
reaches a predetermined level, unless
the location will ensure that the
T4360A will pick up a temperature
rise. It must only be located inside a
dwelling or outhouse, and not directly
exposed to the weather. A frost
thermostat should not be fitted
outdoors.
The thermostat must be wired to
override all other time and
temperature controls and preferably to
switch on the heating circuit, rather
than the hot water circuit.
To ensure correct operation the
thermostat should be mounted on a
vibration free surface.