Honeywell DT92E Digital Wireless Room Thermostat
Honeywell

Honeywell DT92E Digital Wireless Room Thermostat

Honeywell

Product Code: DT92E1000

£92.00
Ex Tax: £76.66
Quantity:  
 

Honeywell DT92E Digital Wireless Room Thermostat

Honeywell DT92E Digital Wireless Room Thermostat

  • Energy saving TPI control
  • ECO button for energy saving mode 
  • 30 metres wireless range 
  • Two way wireless communications 
  • Signal strength indicator 
  • Volt free connections 
  • Simple user operation 
  • 5 to 35°C set point range 
  • OFF setting with adjustable OFF setpoint 
  • Mains or low voltage switching
  • DT92E User Manual
  • DT92E Specification Brochure

The DT92E wireless digital room thermostat has been designed to provide automatic temperature control of gas or oil fired boiler systems, underfloor heating, electric heating and zoning systems.  Energy efficiency is addressed by state of the art control performance qualifying it as a Load Compensator.
The DT92E has an ECO button energy saving feature which gives timed setback or boosts temperatures to reduce energy demand.
This is a TPI (Time Proportional & Integral) control product as defined in the Building Regulations, which make boilers operate more efficiently and provides close, accurate control. This is continually improved by a self learning adaptive capability.
The OFF setting can be used for frost or hypothermia protection, assuming the system time control is also switched on.
'Installer Mode' allows control to be matched to the system and user requirements, adapting minimum on or off times, set point controls etc.
The volt free connections are ideal for use with combination boilers or heating zones and for replacing existing thermostats.

The new DT92 family of wireless digital room thermostats is a range of market leading products designed to provide comfort with economy in modern heating systems. Comprising a battery-powered room thermostat and a mains switching relay box, DT92 features robust 2-way RF communications between the units. This allows signal strength testing to help the installation process. The RF link between both units is already set (prebound) at the factory, so the product is ready for immediate installation.
Energy efficiency is addressed by state-of-the-art TPI control performance and an ECO button energy saving feature. Applications include control of gas or oil-fired boiler systems, underfloor heating, electric heating and zoning systems. With a modern fresh look that complements any style of décor, and a range of valued features for users and installers alike, DT92 sets the standard for simple environmentally-friendly wireless room thermostats.

Normally same day dispatch

Question

I have a ferroli combi boiler. When the plumber installed in 2005 he moved the boiler and did not install a room stat. SO THERE IS NO ELECTRICAL WIRING to just replace the room stat. Is it possible to connect a wireless room stat and receiver if so what do I need and how much will it cost.

Answer

Thank you for your enquiry - If you require a wireless non programmable RF room thermostat
then the Honeywell unit below is suitable for use with Combi type systems
http://www.uk-plumbing.com/honeywell-dt92e-digital-wireless-room-thermostat-p-542911.html These are normally used if you already have a timer for the control of the heating already fitted to your boiler or heating system. If you require a programmable wireless room thermostat which takes care of both the time and temperataure control of your heating system then
http://www.uk-plumbing.com/honeywell-cm927-7-day-wireless-programmable-room-thermostat-p-41212.html
These are normally used to replace the timer as they are programmable.

Question

I am looking for a straight forward remote control for combi boiler not
programmable just on temperature where it can be wired to boiler and
receiver can be used in any room do you have such an item if so can you send
me details thank you.

Answer

Thank you for your enquiry - If you require a wireless non programmable RF room thermostat
then the Honeywell unit below is suitable for use with Combi type systems.
http://www.uk-plumbing.com/honeywell-dt92e-digital-wireless-room-thermostat-p-542911.html

Question

Hello - Does anyone make a RF Room stat that can be just carried around or left on a table etc. I know Honeywell make a programable one i.e programm heating time etc as well as being a room stat but I want just a moveable stat!

Answer

Thank you for your enquiry - The Honeywell programmable wireless thermostat as the CM927 are certainly portable and supplied with a table stand as page image.
http://www.uk-plumbing.com/honeywell-cm927-7-day-wireless-programmable-room-thermostat-p-41212.html
If you require a portable non programmable RF room thermostat only there are none that are supplied with a stand although by their nature they are portable as
http://www.uk-plumbing.com/honeywell-dt92e-digital-wireless-room-thermostat-p-542911.html