Honeywell 40003916-003 Replacement Powerhead for V4073A
Honeywell

Honeywell 40003916-003 Replacement Powerhead for V4073A

Honeywell

Product Code: 40003916-003

£82.78
Ex Tax: £68.98
Quantity:  
 

Honeywell 40003916-003 Replacement Powerhead for V4073A

  • Replacement powerhead for use with the Honeywell V4073A Valves.
  • Power head assembly can be replaced without drain down.
  • 40003916 Product Brochure

Application

The 40003916 power heads enable the complete power head assembly to be replaced, without draining down, on V4073 Mid Position series valves.

On older style valves, which did not have the replaceable head feature, the adaptor plate assembly can be used to upgrade the valves to allow the replaceable power head to be used.

Installation

When making a like for like replacement of the power head only, ensure that the Auto/Manual lever on both the installed and replacement power heads is in the Manual position. The power head is held to the valve body with two fixing screws which are held captive in the power head base. If upgrading an older style valve it will be necessary to drain the system water level to below the zone valve. The adaptor plate assembly is held in position by four screws (supplied).

Normally same day dispatch

Question

Hello - I am looking for a replacement actuator for a Honeywell 272848 2 port valve.

Answer

Thank you for your enquiry - Unfortunately this code is not listed, the Honeywell actuators will have an I.D label with the correct reference on the actuator on the opposite side to the manual lever. If the actuator is internal to a boiler please advise the make and model of boiler.

Question

Hello – I have two Honeywell motorised valves which don't seem to be working properly. On your website you show replacement head kits. They were installed about ten years ago. The printed numbers on the base of my two valves are F6 9833 and F6 9847. Are your kits compatible?

Answer

Thank you for your enquiry - The Honeywell actuators will have an I.D label with the correct reference
on the actuator on the opposite side to the manual lever which will match one of the valves available from this page https://www.uk-plumbing.com/honeywell-40003916-003-replacement-powerhead-for-v4073a-p-1402.html for which the actuators for 2 or 3 port valves are listed.
The codes  given represents the week and year of manufacturer but the actuators on the page above
will be a straight replacement.

Question

Hello -  Do you stock repair kit or kits for V4073A Central heating motorised valve.

Answer

Thank you for your enquiry - If the Powerhead (Actuator) has failed this can be replaced using as page link below
https://www.uk-plumbing.com/honeywell-40003916-003-replacement-powerhead-for-v4073a-p-1402.html
The only other replaceable part is the ball and ring kit as http://www.uk-plumbing.com/honeywell-40003918-006-plate-and-ball-assembly-p-1403.html

Question

Hello – re Honeywell replacement head 40003916-003 for 4073a1039 later type. I wish to purchase from you the above item as i am returning an incorrectly supplied replacement to a local company. I know that the 4073a has five wires but can you confirm that the 40003916-003 also has five wires and not six as does 40003916-001 which I believe has been incorrectly supplied to me.

Answer

Thank you for your enquiry - Please find page link for the Honeywell 40003916-003 Powerhead which is a 5 wire actuator.
https://www.uk-plumbing.com/honeywell-40003916-003-replacement-powerhead-for-v4073a-p-1402.html

Question

Hello – Do you have the motor assembly etc for a Honeywell VA4073A 1039 3 way valve, i think the motor is suspect on the one I have ?.

Answer

Thank you for your enquiry - Please find product page link for the complete actuator to suit the V4073A 1039
http://www.uk-plumbing.com/honeywell-40003916-003-replacement-powerhead-for-v4073a-p-1402.html
or just the synchron motor as
http://www.uk-plumbing.com/honeywell-40002737-003-240v-synchron-motor-p-1401.html