Honeywell 40003916-001 Replacement Powerhead for V4043H
Honeywell

Honeywell 40003916-001 Replacement Powerhead for V4043H

Honeywell

Product Code: 40003916-001

£51.98
Ex Tax: £43.32
Quantity:  
 

Honeywell 40003916-001 Replacement Powerhead for V4043H

  • Replacement powerhead for use with the Honeywell V4043C and V4043H Zone Valves.
  • Power head assembly can be replaced without drain down.
  • 40003916 Product Brochure

Application

The 40003916 power heads enable the complete power head assembly to be replaced, without draining down, on V4043C and V4043H Zone Valves. On older style valves, which did not have the replaceable head feature, the adaptor plate assembly can be used to upgrade the valves to allow the replaceable power head to be used.

Installation

When making a like for like replacement of the power head only, ensure that the Auto/Manual lever on both the installed and replacementpower heads is in the Manual position.The power head is held to the valve body with two fixing screws which areheld captive in the power head base. If upgrading an older style valve it willbe necessary to drain the system water level to below the zone valve.The adaptor plate assembly is held in position by four screws (supplied).

Normally same day dispatch

Question

Re:Honeywell V4043H 22mm motorised valve replacement powerhead.  How do you identify old style from new? The 40003916 product brochure  shows a picture of one style, but no indication whether this is old or new.  Please advise.

Answer

Thank you for your enquiry - Valves made after 1987 can be identified by a bump on the top of the powerhead (see page image) which is the current model.
http://www.uk-plumbing.com/honeywell-40003916-001-replacement-powerhead-for-v4043h-p-41209.html
If your actuator does not have the raised bump then it will be pre 1987 and the adaptor as below is required
http://www.uk-plumbing.com/honeywell-40003918-006-plate-and-ball-assembly-p-1403.html

Question

Please can you help . I have a Honeywell motorised 2 port valve fitted to my central heating part
no : 40000 593 073 , This number is stamped inside the metal cover , On the motor is the part number : 4000 2737 - 001   , 8936 .
It looks like it is on the way out and I am trying to source  a replacement. If possible I would just like to replace the power head rather than drain the system . Is there any chance you can help me.

Answer

Thank you for your enquiry - The Honeywell actuators will have an I.D label with the correct reference
on the actuator on the opposite side to the manual lever which will match one of the valves available from this page

Question

Please can you help . I have a Honeywell motorised 2 port valve fitted to my central heating part
no : 40000 593 073 , This number is stamped inside the metal cover , On the motor is the part number : 4000 2737 - 001   , 8936 .
It looks like it is on the way out and I am trying to source  a replacement. If possible I would just like to replace the power head rather than drain the system . Is there any chance you can help me.

Answer

Thank you for your enquiry - The Honeywell actuators will have an I.D label with the correct reference
on the actuator on the opposite side to the manual lever which will match one of the valves available from this page
http://www.uk-plumbing.com/motorised-valves-honeywell-motorised-valves-c-220_274_276.html
Providing the valve is not internal to the boiler and is two port then the correct Power Head only will be as http://www.uk-plumbing.com/honeywell-40003916001-replacement-powerhead-for-v4043h-p-41209.html

Question

Hi - Honeywell 40003916-001 Replacement Powerhead for V4043H. I need two of the above but as we have no heating, are you able to do a next day delivery?

Answer

Thank you for your enquiry - Please find page link for the Honeywell 40003916-001 Powerheads only which are stock items and normally next working day delivery. http://www.uk-plumbing.com/honeywell-40003916001-replacement-powerhead-for-v4043h-p-41209.html

Question

Hello – I am after the actuator only, not the valve to suit the Honeywell  V4043H 1106.

Answer

Thank you for your enquiry - Please find page link for the Honeywell 40003916-001 Powerhead only which will fits the Honeywell V4043H 1106
https://www.uk-plumbing.com/honeywell-40003916-001-replacement-powerhead-for-v4043h-p-41209.html

Question

Hi – I have a central heating system installed using V4043H1007 valves, one of which has failed.  Is it possible to replace the control part of the valve without replacing all the plumbing ?  If so do I need to order the whole valve and disassemble or can I just order the control section ?

Answer

Thank you for your enquiry - Please find page link for the Honeywell 40003916-001 Powerhead only which will replace your existing.
https://www.uk-plumbing.com/honeywell-40003916-001-replacement-powerhead-for-v4043h-p-41209.html

Question

Hello - I need to replace the power-head on a Honeywell valve V4043H1056. The valve is fairly old and the second number on the motor itself is 40002162. 002  9923 whilst your valve details are 40003916. Will your replacement head replace my faulty one, please?

Answer

Thank you for your enquiry - Please find page link for the Honeywell 40003916-001 Powerhead which will replace your existing. https://www.uk-plumbing.com/honeywell-40003916-001-replacement-powerhead-for-v4043h-p-41209.html

Question

Hello – I have an old Honeywell two port 22mm valve on my hot water system that will not activate it's micro switch, can I get a new motor, four wire type? Or will a new head fit? The number on the top is 272848.

Answer

Thank you for your enquiry - Please find page link for the Honeywell 40003916-001 Powerhead.
Providing your valve is this type and  it was made after 1987 then it should be a simple replacement.
Valves made after 1987 can be identified by a bump on the top of the powerhead (see picture)
https://www.uk-plumbing.com/honeywell-40003916-001-replacement-powerhead-for-v4043h-p-41209.html
If your actuator does not have the raised bump then it will be pre 1987 and the adaptor as below is required
https://www.uk-plumbing.com/honeywell-40003918-006-plate-and-ball-assembly-p-1403.html

Question

Hi - Do you have Honeywell 40003916-001 Replacement Powerhead for V4043H in stock?

Answer

Thank you for your enquiry - Please find product page link for the Honeywell 40003916-001 Replacement Powerhead
http://www.uk-plumbing.com/honeywell-40003916-001-replacement-powerhead-for-v4043h-p-41209.html  these are stock items and normally next working day delivery via UPS Couriers.