Danfoss Randall Programmable Room Thermostat TP5000 Si
Danfoss

Danfoss Randall Programmable Room Thermostat TP5000 Si

Danfoss

Product Code: 087N791000

£57.51
Ex Tax: £47.93
Quantity:  
 

Danfoss Randall Programmable Room Thermostat TP5000 Si

Danfoss Programmable Room Thermostat TP5000 Si

  • Stylish modern design
  • Large easy to read LCD display
  • Easy to programme and operate
  • Battery powered for ease of installation
  • Service interval function
  • Factory set clock
  • Automatic BST/GMT time change
  • Hard wired model
  • Many additional features

The TP5000 Si is an easy to install-and-use 5/2 day programmable room thermostat which offers up to six time and temperature changes each day with different programmes for weekdays and weekends. Battery powered for ease of installation, the TP5000 Si has a large, easy-to-read LCD display. It is easy to programme and operate because of a built-in switching programme that the user can easily change to suit individual heating requirements. A big plus with the TP5000 Si is that it incorporates a real time clock and calendar function which eliminates the need for time-setting and BST/GMT time changes. Time and date are factory-set making time setting or adjustment unnecessary. Conventional On/Off control is the standard setting for the TP5000 Si but advanced chrono-proportional control is an installer-set option. This modulating control mode uses a cycling pattern within which boiler on/off percentages are varied to satisfy heating requirements. Chrono-proportional cycling rates of 3, 6, 9 or 12 per hour can be selected. Service Interval function The optional Service Interval function incorporated into the TP5000 Si helps landlords meet the boiler servicing requirements of Gas Safety Regulation 36. The unit provides audible and visual warnings from 28 days before servicing is due and ultimately reduces the heating output should the due date pass. Full heating operation can only be restored by an authorised installer.

Normally same day dispatch

Question

Hello - I'm hoping you can help, I need to replace my existing Danfuss TP5 thermostat because the LCD display has broken.  Its being used to regulate an old Baxi 105e Combi Boiler.  The current thermostat is hardwired, I was thinking of maybe upgrading to a more attractive model but that is still compatible.  any suggestion?

Answer

Thank you for your enquiry - Please find product page link for the Danfoss TP5000 Si Programmable
thermostat (hard wired) version which is a 5/2 day unit and replaces the TP5.
http://www.uk-plumbing.com/danfoss-randall-programmable-room-thermostat-tp5000-si-p-49392.html
Or as an alternative the TP7000 which offers 7 day programming
http://www.uk-plumbing.com/danfoss-randall-tp7000-programmable-room-thermostat-p-1313.html

Question

Hi - Could you tell me if the Danfoss TP5000 timer/thermostat is a "simple" straight replacement for an existing standard room stat?  That is, are there other installation or units involved.  We don't want a wireless set-up, as we already have a sophisticated Horstmann controller in the boiler-room.

Answer

Thank you for your enquiry - Please find product page link for the Danfoss TP5000 Si Programmable Thermostat
http://www.uk-plumbing.com/danfoss-randall-programmable-room-thermostat-tp5000-si-p-49392.html
Most newer battery thermostats are 2 wire thermostats, ie. neutral and earth not required. I have attached the specification sheet for your information.