Albion Superduty Indirect Hot Water Cylinder CF45
Albion Superduty Indirect Hot Water Cylinder CF45
Albion

Albion Superduty Indirect Hot Water Cylinder CF45

Albion

Product Code: AN0253

£406.04
Ex Tax: £338.37
Quantity:  
 

Albion Superduty Indirect Hot Water Cylinder CF45

Albion Superduty Indirect Hot Water Cylinder 600x350mm Foam Lagged

  • Height: 600mm
  • Diameter: 350mm (Bare size before lagging)
  • Superduty CF45: Plenty of hot water for a standard bath and gravity shower in any home. 
  • Ultra fast recovery of hot water allows for a
    reduction in cylinder size.
  • The installation of a Superduty will reduce boiler
    operating times and cycling periods resulting in
    savings of up to 40% compared with systems using conventional indirect cylinders.
  • Water Capacity: 45 litres
  • All cylinders are insulated with Albions unique CFC free polyurethane foam.
  • Albion Superduty Cylinder Brochure

 

Unlike a conventional cylinder which utilises a single 28mm diameter coil, Superduty multicoils are engineered with a manifold which divides into four coiled tubes. This arrangement ensures that far more water is in contact with the copper wall of the heat exchanger, dramatically improving heat transfer between primary and secondary waters.
The Superduty Multicoil heat exchanger is proven to provide cost effective operation and performance, unparalleled in systems of this type.

Normally dispatched within 1 - 2 working days

Question

Hi - I would like to know if you have an albion superduty CF45 cylinder in stock.

Answer

Thank you for your enquiry - Please find product page link for the Albion Super Duty CF45 hot
water cylinder which is a stock item.
http://www.uk-plumbing.com/albion-superduty-indirect-hot-water-cylinder-cf45-p-1510.html

Question

Hello  –  I note the diameters of the Albion Superduty CF45 and CF80 are 350mm and 400mm respectively before lagging. Can you please tell me the diameters including lagging?

Answer

Thank you for your enquiry - The Superduty cylinders have 50mm foam lagging
which adds about 100mm to the diameter. Please find the full specification sheet below (page 9)
http://www.albionwaterheaters.com/pdfs/sales/domestic.pdf