General Product Information
When hard water is heated beyond 40°C the temporary hardness present starts to produce crystal structures known as Calcite or Aragonite. Calcite crystals being generally small and sticky tend to adhere to both themselves and the surfaces of heat exchangers and pipework etc. Aragonite crystals on the other hand prefer to remain naturally in suspension in the water. Scalemaster Electrolytic products operate as a galvanic cell, producing electro-chemical transformations to modify crystal formation from Calcite to Aragonite thus inhibiting build up. As the modification is permanent electrolytically treated cold water can be stored thereby affording whole house protection.

Application
Electrolytic water conditioners provide for whole house protection.

Fitting Location
Incoming cold water mains supply.

Position
Close as possible to stopcock and before first draw off.

Power Source
Not required.

Fitting Instructions
Supplied with packaging, available on request.

Operating Information
Designed for cold water application temperature 1ºC - 40ºC. Do not allow to freeze. Pressure tested to 14 bar. Maximum working pressure 8 bar.

Site Requirements
All work should be carried out by a suitably qualified person to comply with all water byelaws.

Earth Bonding
It is important to maintain earth continuity in accordance with current I.E.E. regulations, when required a suitable earth bonding cable should be fitted to the pipework to bypass the product. A qualified electrician should carry out this work.

Approvals
Scalemaster Electrolytic products are approved by WRAS and comply with the requirements of the United Kingdom Water regulations/Byelaws.